PSE certification is a compulsory safety certification in Japan. It is used to prove that electrical and electronic products have passed the safety standards test of the Japanese Electrical and Material Safety Law (DENAN Law) or international IEC standards. Japan's DENTORL Act (Electrical Device and Material Control Act) stipulates that 498 products must pass safety certification to enter the Japanese market. Among them, 165 types of A products should obtain the diamond-shaped PSE mark, and 333 types of B products should obtain the circular PSE mark.
PSE certification is a compulsory safety certification in Japan, which proves that electrical and electronic products have passed the safety standards test of the Japanese Electrical and Material Safety Law (DENAN Law) or international IEC standards. Japan's DENTORL Act (Electrical Device and Material Control Act) stipulates that 498 products enter the Japanese market
Effective April 1, 2001, the "Electrical Product Control Act (DENTORL)" was officially renamed the "Electrical Product Safety Act (DENAN)". The original T mark and other signs were no longer used, and the PSE mark was replaced. Punitive measures against importers. Unlike the previous regulatory system, the new system will ensure product safety by unofficial agencies.
According to the DENAN law, product certification must be performed by a third-party certification body authorized by the Ministry of Economy, Trade and Industry (METI, Ministry of Economy, Trade and Industry), such as JET, JQA, COSMOS, of which JQA is a member of the Asia Network Forum (ANF).
The DENAN method divides products into two categories, A and B. Manufacturers are obliged to keep test results and certifications:
A: The designated electrical equipment and material products must have a diamond-shaped PSE mark on the label; special electrical supplies and materials (112 items in total) must be subject to mandatory third-party verification by an authorized assessment unit (ACAB). The diamond PSE logo can only be affixed after the manufacturer obtains the certificate of compliance
Class B: Other electrical equipment and materials must have a round PSE mark on the product label; non-special electrical supplies and materials (340 items in total) If the manufacturer guarantees the safety structure of the product according to the safety requirements of the Electrical Safety Law, You can affix the round PSE logo yourself
Related technical information and document requirements
Japanese voltage is AC 100V / 50Hz, 100V / 60Hz
PSE will perform a factory inspection (checking for related test equipment and its applicability), but there is no follow-up inspection. Due to the different cooperation targets of various certification bodies in China, the organizations responsible for auditing in Chinese factories are different. For example, JQA cooperates with China Import and Export Inspection and Quarantine Bureau.
The following organizations may apply for PSE mark compliance certificate:
Japanese manufacturer
进口商 Japanese importer
指定 Designated Japanese importer has designated foreign manufacturers
The notified supplier can only be a Japanese manufacturer / importer. After the notified supplier obtains the certificate of compliance and affixes the PSE mark, METI will be deemed to be liable. A foreign manufacturer cannot become a notified supplier, but must provide a valid compliance certificate issued by a Japanese importer issued by a qualified ACAB.
Safety test:
CB certificate and report (including Japanese difference test) Japanese manual or assembly manual
Wiring diagram Japanese label (including PSE mark and notified supplier name)
PCBPCB design drawings related to safety regulations
Specifications of transformers and coils
Parts list
RFI test: Provide RFI test report (100 V) and EMC test laboratory certification documents
Factory inspection documents
登录 MITI / METI registration factory
Factory registration certificate
Factory test equipment list (asset number, manufacturer name, model, specifications, latest calibration date)
Check procedure
Non-MITI / METI registered factory
Check procedure
Qualification of inspectors
Factory test equipment list (asset number, manufacturer name, model, specifications, latest calibration date)
主 Factory test instrument calibration master file
校验 Calibration report of all test instruments
Certification of traceability standards traceable to national standards
问答 Q & A for PSE certification
What is the classification of Japanese PSE certification?
A: The specified electrical equipment and material products must be certified by a third-party certification body approved by the Ministry of Economy, Trade and Industry of Japan. According to the DENAN law, manufacturers are obliged to keep the test results and certifications. The diamond must have a PSE mark on the label.
B: Other electrical equipment and material products must be certified by a third-party certification body approved by the Ministry of Economy, Trade and Industry of Japan. According to the DENAN law, manufacturers are obliged to keep test results and certifications. The label must have
PSE certification is a compulsory safety certification in Japan, which proves that electrical and electronic products have passed the safety standards test of the Japanese Electrical and Material Safety Law (DENAN Law) or international IEC standards. Japan's DENTORL Act (Electrical Device and Material Control Act) stipulates that 498 products enter the Japanese market
Effective April 1, 2001, the "Electrical Product Control Act (DENTORL)" was officially renamed the "Electrical Product Safety Act (DENAN)". The original T mark and other signs were no longer used, and the PSE mark was replaced. Punitive measures against importers. Unlike the previous regulatory system, the new system will ensure product safety by unofficial agencies.
According to the DENAN law, product certification must be performed by a third-party certification body authorized by the Ministry of Economy, Trade and Industry (METI, Ministry of Economy, Trade and Industry), such as JET, JQA, COSMOS, of which JQA is a member of the Asia Network Forum (ANF).
The DENAN method divides products into two categories, A and B. Manufacturers are obliged to keep test results and certifications:
A: The designated electrical equipment and material products must have a diamond-shaped PSE mark on the label; special electrical supplies and materials (112 items in total) must be subject to mandatory third-party verification by an authorized assessment unit (ACAB). The diamond PSE logo can only be affixed after the manufacturer obtains the certificate of compliance
Class B: Other electrical equipment and materials must have a round PSE mark on the product label; non-special electrical supplies and materials (340 items in total) If the manufacturer guarantees the safety structure of the product according to the safety requirements of the Electrical Safety Law, You can affix the round PSE logo yourself
Related technical information and document requirements
Japanese voltage is AC 100V / 50Hz, 100V / 60Hz
PSE will perform a factory inspection (checking for related test equipment and its applicability), but there is no follow-up inspection. Due to the different cooperation targets of various certification bodies in China, the organizations responsible for auditing in Chinese factories are different. For example, JQA cooperates with China Import and Export Inspection and Quarantine Bureau.
The following organizations may apply for PSE mark compliance certificate:
Japanese manufacturer
进口商 Japanese importer
指定 Designated Japanese importer has designated foreign manufacturers
The notified supplier can only be a Japanese manufacturer / importer. After the notified supplier obtains the certificate of compliance and affixes the PSE mark, METI will be deemed to be liable. A foreign manufacturer cannot become a notified supplier, but must provide a valid compliance certificate issued by a Japanese importer issued by a qualified ACAB.
Safety test:
CB certificate and report (including Japanese difference test) Japanese manual or assembly manual
Wiring diagram Japanese label (including PSE mark and notified supplier name)
PCBPCB design drawings related to safety regulations
Specifications of transformers and coils
Parts list
RFI test: Provide RFI test report (100 V) and EMC test laboratory certification documents
Factory inspection documents
登录 MITI / METI registration factory
Factory registration certificate
Factory test equipment list (asset number, manufacturer name, model, specifications, latest calibration date)
Check procedure
Non-MITI / METI registered factory
Check procedure
Qualification of inspectors
Factory test equipment list (asset number, manufacturer name, model, specifications, latest calibration date)
主 Factory test instrument calibration master file
校验 Calibration report of all test instruments
Certification of traceability standards traceable to national standards
问答 Q & A for PSE certification
What is the classification of Japanese PSE certification?
A: The specified electrical equipment and material products must be certified by a third-party certification body approved by the Ministry of Economy, Trade and Industry of Japan. According to the DENAN law, manufacturers are obliged to keep the test results and certifications. The diamond must have a PSE mark on the label.
B: Other electrical equipment and material products must be certified by a third-party certification body approved by the Ministry of Economy, Trade and Industry of Japan. According to the DENAN law, manufacturers are obliged to keep test results and certifications. The label must have